Browse Our Catalog

Lab Benches - Mega Sale! Save up to 22%


Mega Sale! Up to 22% off on Lab Benches at Paragon pbc. Top brands include Bel-Art Products, Durham, Robinson Steel Co., BELART, Diversified Woodcrafts, BenchPro, EDSAL, TrippNT, & Whatman. Hurry! Limited time offers. Offers valid only while supplies last.



Bel-Art F24675-0000 Science Ware Lab mat Bench Liner (Pack of 6)
By Bel-Art Products
In Stock
$363.95

mpn: F24675-0000,

4.2 out of 5 stars with 53 reviews
Disposable lab mat Bench liner speeds clean-up and safeguards work surfaces from stains, spills and wear. Simply roll up and discard after contamination.Highly absorbent upper surface traps up to 420Ml/m² of water, dyes, corrosive chemicals or radioactive solutions. Flexible polyethylene film backing is non-skid and prevents soak-through of most solutions. Available in 50.8Cm (20'') wide by 15.2 m (50 ft.) rolls, or 50.8 x 61 cm (20 x 24'') pre-cut sheets. Rolls are easily cut with the Science


Durham Steel Medium Duty Machine Table, MT244836-2K195, 1 Shelves, 2000 lbs Capacity, 48" Length x 24" Width x 36" Height
By Durham
In Stock
$223.67

mpn: MT244836-2K195, ean: 0714334004060,

4.3 out of 5 stars with 18 reviews
Durham medium duty machine table is welded construction. Foot pads with pre-drilled holes for lagging to the floor. Durable gray, textured powder coat finish. Ships fully assembled and ready for use. 14 gauge shelf with stiffeners. 1-1/2-inches x 1/8-inches angle iron frame.All welded construction. Foot pads with pre-drilled holes for lagging to the floor. Durable gray, textured powder coat finish. Ships fully assembled and ready for use.


Stainless Steel Locker Room Bench and Pedestals - 72" L x 12" W x 17 3/4" H
By Robinson Steel Co.
In Stock
$495.00

mpn: RSCSSBWP-72,

4.1 out of 5 stars with 49 reviews
Bench tops are stainless steel 16 gauge x 12'' wide x 1.5'' high #304 grade polished brushed finish and are equipped with a stainless steel weld nut to accept bolts for fastening the pedestals. Corners are TIG welded and cleaned. Bench pedestals are #304 grade stainless steel with a 2'' dia./11 gauge column and 11 gauge 8.25''/11 gauge mounting plates.Stainless steel bolts and locking washers are provided for fastening the pedestals to the bench top. Overall height is 17 3/4''. Floor anchors not




ADA Plastic Slat Locker Room Bench - 48" x 24" x 19" - Sand Color Top, 304 Stainless Steel Legs
By Robinson Steel Co.
In Stock
$680.00

mpn: RSCADASB-Sand/304 Stainless,

4.2 out of 5 stars with 29 reviews
MADE IN THE USA!. Bench Measurement: 48''w x 24'' x 19''h, Slats consist of 4 @ 5'' and 1 @ 3''. Slats have 1/4'' gap between them. Maintenance-free tops: Never need paint, stain, or sealer. All hardware included except floor anchors. ADA and so-called ''Barrier Free'' guidelines are set by the Federal Government and are sometimes modified by regional or local, lower level government agencies. Please check with your architect or these agencies to confirm that this product applies to your


Durham Steel Medium Duty Machine Table, MT243636-2K195, 1 Shelves, 2000 lbs Capacity, 36" Length x 24" Width x 36" Height
By Durham
In Stock
$216.99
$210.96
You Save: 3%

mpn: MT243636-2K195, ean: 0714334003940,

4.1 out of 5 stars with 24 reviews
Durham medium duty machine table is welded construction. Foot pads with pre-drilled holes for lagging to the floor. Durable gray, textured powder coat finish. Ships fully assembled and ready for use. 14 gauge shelf with stiffeners. 1-1/2-inches x 1/8-inches angle iron frame.All welded construction. Foot pads with pre-drilled holes for lagging to the floor. Durable gray, textured powder coat finish. Ships fully assembled and ready for use.


Bel-Art Lab-Aire II Single-Sided Non-Electric Benchtop Glassware Dryer; 2 Tier, 14.75 x 7 x 15.4 in. (F18933-0012)
By BELART
In Stock
$184.86

mpn: 189330012, ean: 0191634009405,

4.3 out of 5 stars with 7 reviews
Versatile rack accomodates tubes, vials serological tubes and reagent containers. 17 wells,14mm(9/16'') diameter and 5 drying pins, ideal for Kahn or Wasserman tubes Polyethylene is corrosion and chemical resistant. Rack Dimensions: 20.3 x 10.2 x 5.7cm H (8 x 4 x 2 ¼''H). Sold per each. Research, industrial and healthcare professionals rely on SP Scienceware for their sample handling needs. Sold worldwide, Bel-Art and H-B Instrument brand laboratory supplies include over 5,000 items from safety


Diversified Woodcrafts P7202K30N - 24"x54" - 30" High, Plain Apron Laboratory Table, Red Oak Legs & Apron, ChemGuard Top, Made in USA
By Diversified Woodcrafts
In Stock
$520.00
$405.55
You Save: 22%

mpn: P7202K30N, ean: 0874002005048,

4.5 out of 5 stars with 10 reviews
In 2015 Diversified Woodcrafts Celebrated 40 years of building quality oak and maple furniture. If you visit schools throughout the country, chances are you’ll find the Diversified Woodcrafts label on at least one piece of furniture in the school, if not a whole classroom’s worth.• Plain Apron Science / Laboratory Table• Part number: P7202K30N• Dimensions: 24''x54'' - 30'' High• Top: ChemGuard Top • Legs and aprons are constructed of solid Red Oak and are smoothly machined with a


Workbench with Gray Frame, Various Sizes and Top Materials
By BenchPro
In Stock
$176.00

mpn: RCR3048,

4.9 out of 5 stars with 26 reviews
The Roosevelt Workbench is an industrial-grade workbench that features a cleanroom laminate top reinforced by steel, able to hold up to 1, 200 lbs. It’s perfect for supporting all your work tools and materials. Assembling the workbench requires only basic tools and takes approximately ten minutes. The workbench measures 30” in depth and 48” in length and can be adjusted in height between 30''–36” to provide ergonomic comfort. This Roosevelt Workbench comes with a 25-year unconditional


ADA Locker Room Bench with Hardwood Top and Powder Coated GREY Steel Pedestals - 42" L x 20" W x 17.5" H
By Robinson Steel Co.
In Stock
$266.00

mpn: ADABENCH-4220-Gr,

4.8 out of 5 stars with 52 reviews
Selected Hardwood Tops With Radius On All Sides. Two Coat Lacquer Finish On Wood. Seat Height is 17-1/2'' high. Hardware supplied to mount pedestals to tops. Pedestals must be anchored to the floor, hardward for anchoring to floor NOT included. ADA and ''Barrier Free'' guidelines are set by the Federal Government and are sometimes modified by regional or local, lower level government agencies. Please check with your architect or these agencies to confirm that this product applies to your guide l


Durham Steel Medium Duty Machine Table, MT243630-2K295, 2 Shelves, 2000 lbs Capacity, 36" Length x 24" Width x 30" Height
By Durham
In Stock
$270.57

mpn: MT243630-2K295, ean: 0714334003926,

4.4 out of 5 stars with 10 reviews
Durham medium duty machine table is welded construction. Foot pads with pre-drilled holes for lagging to the floor. Durable gray, textured powder coat finish. Ships fully assembled and ready for use. 14 gauge shelves with stiffeners. 1-1/2-inches x 1/8-inches angle iron frame.All welded construction. Foot pads with pre-drilled holes for lagging to the floor. Durable gray, textured powder coat finish. Ships fully assembled and ready for use.


Durham Steel Extra Heavy Duty Workbench, HDWB-3672-95, 12000 lbs Capacity, 36" Length x 72" Width x 34" Height
By Durham
In Stock
$834.63
$714.74
You Save: 14%

mpn: HDWB-3672-95, ean: 0714334044615,

4.2 out of 5 stars with 25 reviews
Durham extra heavy duty workbench. Top is 3/16-inches thick reinforced steel. 7 gauge steel corner gussets for added strength. Legs are 2-inches by 2-inches by 1/4-inches solid steel angle iron. All models include a 12 gauge steel lower shelf with 500 pounds capacity. Foot pads with pre-drilled holes allow lagging to the floor. Ships fully assembled ready for use. Durable gray, textured powder coat finish.Top is 3/16-inches thick reinforced steel. 7 gauge steel corner gussets for added


Durham Steel Mobile Medium Duty Machine Table, MTM244830-2K295, 2 Shelves, 2000 lbs Capacity, 48" Length x 24" Width x 30" Height
By Durham
In Stock
$234.97

mpn: MTM244830-2K295, ean: 0714334005012,

4.4 out of 5 stars with 60 reviews
Durham mobile medium duty machine table with 1-1/2-inches x 1/8-inches angle iron frame. 3-inches phenolic casters; 4 swivel - include thumb screw brakes. Durable gray, textured powder coat finish. Ships fully assembled and ready for use. 14 gauge shelf with stiffeners.1-1/2-inches x 1/8-inches angle iron frame. 3-inches phenolic casters; 4 swivel - include thumb screw brakes. Durable gray, textured powder coat finish. Ships fully assembled and ready for use.


Durham Steel Medium Duty Machine Table, MT182418-2K195, 1 Shelves, 2000 lbs Capacity, 24" Length x 18" Width x 18" Height
By Durham
In Stock
$181.99

mpn: MT182418-2K195, ean: 0714334003728,

4.3 out of 5 stars with 22 reviews
Durham medium duty machine table is welded construction. Foot pads with pre-drilled holes for lagging to the floor. Durable powder coat finish. Ships fully assembled and ready for use. 14 gauge shelf with stiffeners. 1-1/2-inches x 1/8-inches angle iron frame.All welded construction. Foot pads with pre-drilled holes for lagging to the floor. Durable gray, textured powder coat finish. Ships fully assembled and ready for use.


Deluxe Polyurethane Chair/Stool with Chrome Base and Armrest, 450 lbs Capacity, 18.5" Width x 18" Depth, 20"-28" Seat Height, Black
By BenchPro
In Stock
$202.00

mpn: WAT-DF-3L -Greyhound,

4.5 out of 5 stars with 47 reviews
BenchPro Polyurethane chairs are made the same way modern soft car dashboards are made. They wear very well, are chemical, puncture and tear resistant, take no maintenance, and rarely need cleaning. They support excellent posture as they are firmer than upholstered chairs. Our seating meet and exceed following safety standards: ANSI/BIFMA (American National Standards Inc, Business Industrial Furniture Manufacturers Association) and DIN (Deutsch Industrial Nomenclature) with 5-year unconditional


Edsal UB700 Steel Economy Work Bench with 1" Flake Board, 60" Width x 29" Height x 30" Depth, Industrial Gray
By EDSAL
In Stock
$219.75

mpn: UB700, ean: 0035441303052,

4.9 out of 5 stars with 14 reviews
Edsal steel economy work bench. Steel frame Supported on all 4 sides by an all steel frame. Full 12-inches deep lower shelf included. 1-piece heavy gauge steel legs all electrically welded. Double electrical knockouts in legs front and back. Straight leg design adjusts from 29-inches to 34-inches high in 1-inches increments. Strong thick flake board top that supports well over 200 pounds per square foot. Recommended for manufacturing plants repair shops schools garages and home workshops. Measur


Durham Steel Medium Duty Machine Table, MT183630-2K295, 2 Shelves, 2000 lbs Capacity, 36" Length x 18" Width x 30" Height
By Durham
In Stock
$210.59

mpn: MT183630-2K295, ean: 0714334003834,

4.9 out of 5 stars with 60 reviews
Durham medium duty machine table is welded construction. Foot pads with pre-drilled holes for lagging to the floor. Durable gray, textured powder coat finish. Ships fully assembled and ready for use. 14 gauge shelves with stiffeners. 1-1/2-inches x 1/8-inches angle iron frame.All welded construction. Foot pads with pre-drilled holes for lagging to the floor. Durable gray, textured powder coat finish. Ships fully assembled and ready for use.


TrippNT 50664 PVC Plastic White Personal Bench Top HPLC Supplies Organizer, 24" Width x 12" Height x 6" Depth
By TrippNT
In Stock
$132.87
$125.78
You Save: 5%

mpn: 50664,

4.9 out of 5 stars with 10 reviews
TrippNT's Personal Bench Top HPLC (High Pressure Liquid Chromatography) organizer provides a handy place for ten frequently used HPLC columns, chromatography supplies, wipers, lab books, tools and calculators or other frequently used favorites. With space for up to ten analytical HPLC columns this personal organizer frees up space, adds convenience and provides a designated place for important tools. Measures 24'' width by 12'' height by 6'' depth; 5.4 pounds.Bench top HPLC supplies organizer


TrippNT 50124 White PVC Plastic Bench Top Personal Workstation, 17 Compartments, Large, 24" Width x 12" Height x 7.5" Depth
By TrippNT
In Stock
$132.87
$125.78
You Save: 5%

mpn: 50124,

4.1 out of 5 stars with 34 reviews
TrippNT's Large Bench Top Workstation sorts, stores and protects a variety of lab supplies. Made from durable white PVC plastic, this workstation is easy to clean. This workstation has all the features you need to consolidate and stream-line your process and includes 10 flexible compartments to organize tools and consumables like weigh papers, hemostats, boats, calculators, and clipboards. It also has a built in small Kimwipe holder and six slot tool holder. 24 x 12 x 7.5 inches (width height de


Whatman 2301-6150 Benchkote Plus Surface Protector Sheet, 600mm Length x 500mm Width (Pack of 50)
By Whatman
In Stock
$173.41
$157.08
You Save: 9%

mpn: 2301-6150,

4.4 out of 5 stars with 59 reviews
Benchkote Plus is a thicker, more absorbent material for more demanding applications and can absorb in excess of 0.75 litres of water per square meter. Benchkote Plus is an absorbent, impermeable material designed to protect laboratory surfaces against hazardous spills. The material features a high quality, smooth, absorbent paper which quickly absorbs liquid spills and a laminated polyethylene layer that prevents flow through to the working surface. It is tear resistant, wet or dry, and the whi



Viewing Page 1 of 8

View more products in Lab Furniture.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - paragonpbc.org. All Rights Reserved.